Sunday, August 6, 2017

HUNGARIAN HONVED RIFLES: NEW FIGURES NEWLY PAINTED

For those who may have been following along, you may recall that I posted earlier that among the figures that I had commissioned from Steve Barber that the Hungarian Jagers were the first to have been completed and had arrived. I have been plucking away a bit at a time on them for the last several weeks. They are finally done and now join the ranks of my growing Hungarian/Honved 1848/49 contingent.  This was another exercise in gray tones, but a lighter gray than the Austrian Jagers done earlier.  In this study, you may, as always, clix pix for BIG PIX.  
 I primed them white (as I always do), and then used Testor's Model Master "RAF Medium Gray" for a base color (yes, friends, I'm talking enamels)...
 ...and then brought out the Humbrol "Brown Yellow" for the bags and Testor's Model Master "Leather" for the canteen cover...

 ...then a light wash of black, and a then a highlight in light gray for the trousers and jacket, and a bit more brown yellow for the bag.  Then old school Testor's "Flat Yellow" in the 1/4 oz bottle for the officer's hat and belt details...
...speaking of which, I did one of my officers with white fur as opposed to black, inspired by an illustration of a Honved Pioneer officer who had the same gray jacket with white fur in the Somogyi Honved Army 1848-49 bookThe fur lining on the figure is a base of flat black and a highlight of light gray followed by a drybrush of flat white. I also painted over the boots on these officers to render trousers.
It was challenging to bring out the green detail against the mid/light gray of the uniforms, so I did all of the details first in black and then went over them in green to get a blackline effect.  This still did not render a good result. The green looked washed out and indistinct.  I tried several old standbye Humbrol greens, "Uniform Green" highlighted with "Light Green" for instance, but those still didn't stand out (for the officer's hat color, though, Humbrol Uniform Green worked fine).  After several other tries, I resigned myself to the look.  But then, just as I was about to "finish" the figures with a coat of clear flat, I looked over and saw an "old school" bottle of Testor's "Beret Green" among my "odds and ends" paints--I couldn't remember buying it. Out of curiousity, I picked it up and gave it a closer look.  I tried it on one figure...and it turned out to be just the thing! 

Once Steve completes the honved infantry in kepis, I'll be rounding out the infantry and the Hungarians will be near completion.  I must say that I don't mind the wait--I don't think I could face another hungarian sleeve knot right now!

 

12 comments:

  1. Nice toys Ed...
    You are brave man with your enamels...
    I am so used to licking my brush to a point that I would be intoxicated by the end of a painting session ...
    The Hungarian revolution is so tempting...I originally made my Shiny Toy Soldiers for this but was seduced by the First Schleswig War...

    All the best. Aly

    ReplyDelete
    Replies
    1. The 1st Schleswig War: another shared mania (along with intoxicating solvents...).

      Delete
  2. Your specially commissioned jaeger sculpts look first rate and your brushwork accentuated them nicely! Painting with enamels? I have not used enamels in about 25 years...

    ReplyDelete
    Replies
    1. Thanks, Jonathan. I came back after a lengthy break from the hobby and picked up where I left off, painting-wise: with enamels. Maybe some day, I'll catch up :)

      Delete
    2. Or, perhaps, your use of enamels will be a trendsetter?

      Delete
  3. The finished figures certainly look good!

    Nice to know that Testor's still works, I was mostly a Humbrol man but gave both up in the 70's because the fumes from the thinners would make me dizzy.

    ReplyDelete
    Replies
    1. Thanks, Ross,

      A bit of dizziness? You say that like it's a bad thing. Nothing like a bit of a buzz to mark the end of a project.

      Delete
  4. Replies
    1. Good to hear from you Svjek. Appreciate it.

      Delete
  5. Excellent as ever Ed. Don't worry Ed their will be more sleeve knots in the future. :-)

    All the best,

    GH

    ReplyDelete
  6. Beret Green, Rubber, Leather, Gold, Silver and Copper are all old 'square bottle' Testors that I still rely on regularly when others fail me.

    ReplyDelete
  7. Great job, wonderful and impressive details on them!

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...