LOGISTICKS

 

An uncharacteristic foray in DIY terrain for the Meanderer: stacked log piles. 

Greetings, dear reader(s). In this post, I will show not only the latest bit of hobby production 'round here, but how a trip down the rabbit hole brought me to the "need" to create such an eclectic bit of terrain.  As you can see from the above, these represent limbed and stacked logs.  Read on for why and how I wound up doing such things.

Well, doctor, it all started when I completed my "Jager" project: a contingent of Prussian and Austrian Jagers (left and right above, respectively).  Although certainly suitable for other scenarios in my One Hour Skirmish Musket to Rifle variant, I wanted to pit these two contingents against each other in the classic confrontation of the 1866 Austro-Prussian war.   It didn't take me long to find a suitable battle and sector where direct action between Austrian and Prussian Jagers did indeed happen...

...in the heavy, back and forth fighting in the Swiepwald (above) during the Battle of Koniggratz  (above image of one phase of the fighting there from the superb Battlefield Anomalies Blog: highly recommended). 

...this is another view of the Swiepwald as shown on the Kriegspiel map. The Austrians were pushing in from the right (east) and the Prussians from the left (west).  I wasn't really interested in a fight "in" a forest as a game. So, upon first blush, I was thinking of looking at the fighting near the Swiepwald as opposed to in it. But upon further study (it's always good to have books and references)...

...I found that the Swiepwald was not a monolithic piece of forested terrain, but was variegated, with some open meadows (in green) new growth and old growth areas, a gully (shown in brown in the upper right), and most of all, an area that had been cleared where the trees had been harvested and stacked into log piles (the lighter green area at the lower right with the stacked log piles shown in brown). The above came from the Prussian staff study of the battle (the image was found in the Wargaming in History series, Volume 12, Koniggratz, 1866, by John Drienkienwicz and Andrew Brentnall)

This cleared area became known as the "Meadow of Death" as the units from both sides were fed into it and fought back and forth across the stacked log piles (the above image was found on the aforementioned Battlefield Anomalies blog--a motion picture still from a move on the battle).  My sense is that during the battle there were few if any standing trees in this sector (as opposed to the above picture--which is a good representation of the action otherwise). 

So, now I had to find me some stacked logs suitable for 28mm gaming. Being a lazy sod, I first scanned the model railroad terrain sites for likely subjects: long story short, there was only one, and it was expensive and consisted of plastic logs that I would have to paint, anyway.  Confronted by the fact that I couldn't buy these ready made, I contemplated the sober realization that one way or the other I would have to fabricate these myself.  I then thought about all the articles, blogs, and youtubes I had viewed where more industrious fellows than me had gathered sticks and whatnot from 'round their houses for use as scatter terrain. It was then that the 40- watt bulb of inspiration started sputtering above my head...

...and looking at the "back 40" behind our house, I came to the astounding realization that I had my very own Swiepwald out there...

...complete with ready made log piles of raw material (well, piles of branches and sticks that I had stacked to clear the paths: but you get the idea).  So, I then went through these and picked out likely suspects of sticks of similar diameter and reasonable straightness (not as easy as it sounds). I then cut them into 6" and 4" lengths (for longer and shorter log piles). Then--when the wife was out--I baked them in the oven at 250 degrees for 15 minutes to kill any creepy crawlies that might be lurking...

...and from these, I created a series of two-level log piles, with the base level consisting of three sticks with two sticks for the second level.  Knowing that white glue itself would not be sufficient, I pinned the top level sticks onto the lower level ones by drilling a hole in both and using snipped lengths of florist wire for pins: and then slobbering white glue all over the pins and any parts that contacted each other... 

...for the lower (base) level, I drilled three holes through each of the sticks and threaded florist wire through them, pulling them together tight and tucking the wire out of sight on the underside (shown above). Once completed, I sprayed them with a generous coating of Scenic Cement  (lazy man's white glue mixture).  This would seal them and help to keep the bark and other bits from flaking off through use (or at least to minimize it).

Of course, I had to produce enough of these beasties to sprinkle over a 4 foot by 6 foot area, which took me about a week (sheesh).  When this all started, I didn't even know that I needed (or wanted) a log pile, much less a bunch of them. But, now I am outfitted to set games in the Swiepwald--and I reckon that I may be able to find other, less extensive, uses for these bits as well.  

Excelsior!