Saturday, December 31, 2016

HONVED GRENADIERS, AND YEAR-END POST FOR 2016

I've noted that on many other blogs that I follow that the year ends with some sort of summary post, often detailing the number of figures painted and games played. I haven't kept such tidy records, unfortunately, so that won't be the nature of this post. As I mark the arrival of the first New Year since this blog began (in August 2016), there is a happy coincidence that does provide a nice point of emphasis for the end of this period. My first active blog post detailed my conversion of Napoleonic Austrian Grenadiers into Pre-1850 Austrian Grenadiers (pictured below)...  

...and my last project of 2016 returns to the scene of the crime and coincides with the new year--I once again used Eagle Figures Napoleonic Austrian Grenadiers to convert. This time, into Honved grenadiers of the Hungarian Revolution, 1848-49.  [as always, clix pix for BIG PIX]

Here is what I was aiming for...

...Honved Grenadier, above left, image from The Honved Army, 1848-1849 by Gyozo Somogyi. I used the image of reenactors in Budepest (right) to inform the detail on the bearskin (the yellow top).

Once again, I brought out the Green Stuff and modified the Eagle Figures Austrian Greandier with Rolled Greatcoat ...
 ..by shaving off the oak sprig and cockade, and the legging buttons. Then I extended the length of the coat and modified the bearskin--covering up the plate and filling it out to form the more bushy mid-century version.  I then added the largish cockade.  (Before and after above.)

As I've mentioned in a previous post, brown uniforms do present something of a challenge. as far as providing some sort of differentiation. Here is the panoply of paint I wound up using on this uniform that would, on the surface, appear to be two tone: brown and red...
...there are something like 7 different shades of brown, two reds, and four grays.  Once again, these contribute to an overall effect, even if they aren't obvious (that's my story and I'm sticking with it!).  Those of a certain age will notice that I am still using "Old Skool" enamels: a mix of Humbrol, Model Master, and the small bottle Testor's (you can't beat their red and  metallics).  I started painting with these before the earth cooled, and they're in my DNA.   
Here is the result:



Red on brown doesn't stand out very well, so I had to resort to black-lining (not my strong suit) in order to bring out some of the detail.

I also had to free-hand in the cuff loops on the soldiers and the more extensive braiding on on the officer.  With only 6 figures, I could manage (if this were  a larger unit, maybe not). 




 
And so, I conclude 2016 the same way that I started, with grenadiers for my Chocolate Box Wars Project:

The latest: Honved Grenadiers, left, and the first: Austrian Grenadiers, right.

Thanks for your interest in this blog and my projects thus far.  I'm looking forward to continuing into 2017 and arriving at my first full year blogging. Happy New Year!



Excelsior!

 

Friday, December 23, 2016

SEASON'S GREETINGS...

 
...TO ALL, HOWEVER YOU MEANDER.

Wednesday, December 21, 2016

THE GRIDDED GAME MAT: HOW TO


Among my various and sundry home-brew gaming abominations is my Baroque Battles system (pictured above) . This is a hybrid miniatures game that uses uses 6mm figures on a regulated (ie gridded) playing area. When I host games, someone invariably inquires about the game mat, which is the subject of this piece, dear reader. All shall be revealed. If you go to the Baroque Battles page of this blog (see the tabs across the top), you will find a pdf with these instructions that you can download. As usual, clix pix for BIG PIX.


 THE MATERIALS: The mat (at left) is a standard width (36”) piece of felt, obtainable from any fabric store. I had this cut to 8 feet. I also used some standard US letter-sized paper (card stock, heavier paper is better given the spray painting), a measuring device, spray paints, scissors, and a bunch of small weights, below (could be coins: I used washers mostly). Not pictured are the blow torch and bicycle pump, but since these aren’t needed--nevermind.

THE PROCESS: First, you create the blanks for the grid. This is a highly technical step. You take a sheet of paper (standard 8.5” x 11”) and cut it in half (rendering two bits that are roughly 8.5” x 5.5”--see left hand illustration below). Each bit now equals the size of a grid on the mat. Then you repeat a bunch of times until you have lots and lots of them (right below). Note: I re-used materials for this, hence the painted bits you’ll see in these examples. 
 
Next, you lay down a long row of blanks in order to spot the maximum size of your playing area (or you could do the math and measure it all up). At this stage, getting the length is what you’re after. It doesn’t have to be precise: err on the side of longer. There is a handy seam down the center of the felt that you can use to center the blanks. With 8 blanks, the playing area winds up being a neat 72 inches. 
 

Mask off the edges of the playing area  This is where longer is better, so long as your grid fits inside this area. 






 

Now take up your blanks (right) to  expose your playing area.










 
 
Weigh down your pieces of paper so that they don't blow away when you spray paint (I learned this the hard way!). 




 



                       Then go ahead and spray your ground effects...


This step will give you a nice clean edge between your playing area and the ends of your mat (the patterned area doesn't stand out very well in the photo, so I've highlighted the boundary with a dashed red line). If you enlarge the opening image at the top of this post you'll 
get a good view of the effect.







Now you’re ready for the big step: laying out the grid pattern. Place your blanks starting with the center row and then moving towards the edges. You can see in the picture below how the grid pattern ends just inside the edge zones. The “brick” pattern replicates a hex grid, which is most versatile. You will wind up with seven rows: one in the center and three on each side. The last row on each side is half-sized, which hasn’t been a problem in play. In the picture, the layout is incomplete (I ran out of blanks), but you get the idea.
 
 I found that you can just eyeball the placement of your blanks. It’s not like laying tiles in your house where you must have absolutely regular spacing between the blanks (even the blanks themselves can be a bit irregular). The important thing is that the gaps are contiguous (in other words, the blanks should not overlap or touch; there should be always be a gap between them).




The layout steps above will take care of the interior pattern. For the exterior...


...you’ll need to extend the pattern by one blank in each row beyond the edge of the grid, and then mask off the edge area. This will give you the exterior grid lines (left and right below)...
 





...then you weigh down all the paper (not pictured) and you're ready to spray paint, focusing on the gaps to create your pattern...

...And voila! Your mat is now complete. The close up below illustrates how the contiguous gaps between the blanks flow together in the grid pattern. You can also see that slightly irregular spacing doesn’t really cause an issue (as a matter of fact, it lends a sort of naturalistic look to the pattern). You can also see the half spaces on the edges.
 The mat is ideal for use with two standard banquet tables. 



 I place a US Army blanket on the tables...












...and then I put the game mat down over that.







 
The playing area conforms nicely to the length of the tables....


 ...and there is space left on the edge for elbows, drinks, dice, references, etc...







 Excelsior!



Related Posts Plugin for WordPress, Blogger...