Thursday, January 30, 2020

PRUSSIAN HIGH COMMAND STAND REWORKED

Redone high command stand: now with two mounted figures.

In this post, dear readers, we report on a modest project, the reworking of a command stand.  This is in keeping with the last few projects, which were "upgrades" (for lack of a better term) to replace and/or enhance the collection by incorporating newer figures.  In this case, the temptation of a newly released Prussian High Command set with a mounted officer in the Northstar 1866 Line was too much to resist.  
The original high command stand: both figures are conversions. 

When I was doing my Prussian contingent, I had a smattering of out of production Helion Prussian mounted officers which I needed to use for my lower level command stands (each being a single mounted figure).  This left me with the high command stand to do, for which I decided (above) to convert Great War Miniatures 1914 figures to represent Prinz Friedrich Karl and an Adjutant of the General Staff.  For the curious, this project is more fully addressed in an earlier post. Given that all of my other high command stands have two mounted figures, I decided that I "needed" to upgrade the Prussian stand with a mounted officer from this new set (the fellow in the middle below).  

One interesting sidenote--the Northstar Prussian High Command set has a Prinz Friedrich Karl figure (above left),   but I prefer my Friedrich Karl conversion--so I'm not "upgrading" that one!  As usual, you may clix pix for BIG PIX in this study.

For me, the points of emphasis on command figures of this era are often the sashes and sword knots. The small metal square to the left is a feature of all of my high command stands.  This allows for the addition of a flag (which has a magnet in its base)--just a bit of optional extra eye candy (or in case we have a game where the presence or absence of the flag might signify in some way).            
 Excelsior!

 

14 comments:

  1. Wonderful work on these command stands!

    ReplyDelete
    Replies
    1. Thanks, Phil--sometimes a bit of tinkering pays off :)

      Delete
  2. Nice! I like the the two mounted officers on the stand?

    ReplyDelete
    Replies
    1. Thanks, Jonathan. And now I have a nice dismounted staff officer with a map to use in some other way--win:win.

      Delete
  3. Very nice and also flexible with the magnetized flag.

    ReplyDelete
    Replies
    1. Thanks, AJ; the detachable flag also makes storage much easier, too.

      Delete
  4. Great job. I agree that two (or more) mounted officers looks more commanding. 😀

    ReplyDelete
    Replies
    1. Thanks, Stew. I didn't think at first it would matter, but in practice when all the other high command stands were two mounted figures this one with on just didn't look right.

      Delete
  5. Lovely looking command stand, it's always nice to be consistent on one's command stands!
    Best Iain

    ReplyDelete
    Replies
    1. Thanks, Iain. Good to hear that going so far as to re-base a finished product isn't just a bit of OCD coming through--or at least it's generous of you to not name it that :)

      Delete
  6. The two mounted figures certainly a more weight to the command stand... and as you say you now have the opportunity to do something interesting with the foot figure.


    All the best. Aly

    ReplyDelete
    Replies
    1. Sort of an analogue to "bigger is better"--there really is a significant difference to the look of the stand to even a casual eye...and the spare foot officer does indeed give me ideas for a nice vignette.

      Delete
  7. There's something about these guys with their pickelhaub's that make me want to pick up a rifle or saber and go fight. I guess that was the general idea! Great work on them.

    ReplyDelete
    Replies
    1. Probably most effective when charging with head down and spike forward...

      Delete

Related Posts Plugin for WordPress, Blogger...